Tag Archives: Pro/Engineer

Have You Upgraded to PTC Creo Parametric? Realize Your Full Potential!

For the past month, I’ve been discussing key productivity advantages PTC Creo Parametric has over Pro/ENGINEER Wildfire 5.0, including: cross sectioning, measuring geometry, sheet metal, assembly performance, 3D annotations, a new user experience, and Freestyle modeling. Let’s say you’ve realized the value of these productivity increases and upgraded from Pro/ENGINEER Wildfire 5.0 to PTC Creo […]

Posted in Uncategorized | Also tagged , , , , , , , , , , , | Leave a comment

New Freestyle Capabilities in PTC Creo Parametric Versus Pro/ENGINEER Wildfire 5.0

Freestyle modeling in PTC Creo Parametric.

The PTC Creo Parametric vs. Pro/ENGINEER Wildfire 5.0 blog series has covered areas such as cross sectioning, measuring geometry, sheet metal, assembly performance, 3D annotations, and a new user experience. In our final installment, I will discuss the Freestyle modeling capabilities which are available in every base license of PTC Creo Parametric. Freestyle makes working […]

Posted in Uncategorized | Also tagged , , , , , , , , , | Leave a comment

New User Experience in PTC Creo Parametric Versus Pro/ENGINEER Wildfire 5.0

New User Experience in PTC Creo Parametric

The PTC Creo Parametric vs. Pro/ENGINEER Wildfire 5.0 blog series has covered areas such as cross sectioning, measuring geometry ,sheet metal, assembly performance, and 3D annotations. This week I will discuss the major improvements to the user experience, which are available in every base license of PTC Creo Parametric. 1) Ribbon Interface The most extensive […]

Posted in Uncategorized | Also tagged , , , , , , , , , | Leave a comment

3D Annotations in PTC Creo Parametric Versus Pro/ENGINEER Wildfire 5.0

3D Annotations in PTC Creo Parametric

The PTC Creo Parametric vs. Pro/ENGINEER Wildfire 5.0 blog series has covered areas such as cross sectioning, measuring geometry, sheet metal, and assembly performance. This week I will discuss the improvements to 3D annotations. These feature improvements are available in the base license of PTC Creo Parametric. There is no need to buy additional extensions […]

Posted in Uncategorized | Also tagged , , , , , , , | Leave a comment

Assembly Performance in PTC Creo Parametric Versus Pro/ENGINEER Wildfire 5.0

n PTC Creo Parametric

The PTC Creo Parametric vs. Pro/ENGINEER Wildfire 5.0 blog series has covered cross sectioning, measuring geometry and sheet metal. This week I will discuss the major enhancements to assemblies. These feature improvements are available in the base license of PTC Creo Parametric. There is no need to buy additional extensions or applications to take advantage […]

Posted in Uncategorized | Also tagged , , , , , , , , , , | Leave a comment

Sheet Metal in PTC Creo Parametric Versus Pro/ENGINEER Wildfire 5.0

Flat pattern preview in PTC Creo Parametric

Our recent PTC Creo Parametric vs. Pro/ENGINEER Wildfire 5.0 head to head blog series has covered cross sectioning as well as measuring geometry. This week I’d like to discuss the greatly improved sheet metal capabilities in PTC Creo Parametric. As outlined in previous blog posts, these are core functionality improvements available in the base license […]

Posted in Uncategorized | Also tagged , , , , , , , , , | Leave a comment

Measuring Geometry in PTC Creo Parametric Versus Pro/ENGINEER Wildfire 5.0

measuring geometry in PTC Creo Parametric

Last week I discussed the 3D cross sectioning improvements in PTC Creo Parametric compared to Pro/ENGINEER Wildfire 5.0. Today, I want to highlight the new capabilities for measuring geometry. Bear in mind, this is core functionality in a base license of PTC Creo Parametric. Additional extensions or applications are not required to use these features. […]

Posted in Uncategorized | Also tagged , , , , , , | Leave a comment

Cross Sectioning in PTC Creo Parametric Versus Pro/ENGINEER Wildfire 5.0

Cross Sectioning is faster in PTC Creo Parametric compared to Pro/ENGINEER Wildfire 5.0

There are many enhancements in PTC Creo Parametric which boost user productivity significantly compared to Pro/ENGINEER Wildfire 5.0. One of these areas is 3D cross sectioning. PTC Creo Parametric has new capabilities which make the process of building cross sections faster and easier. Users now have presets for cross sections on the x,y, or z […]

Posted in Uncategorized | Also tagged , , , , , , , | Leave a comment

PTC Creo 2.0: What Pro/ENGINEER Wildfire 4.0 Users Should Know (Part 3 of 3)

KTM Bike 1

Still using Pro/ENGINEER Wildfire 4.0? It was a popular release and served users of its generation well. But since then, we’ve introduced Pro/ENGINEER Wildfire 5.0, PTC Creo 1.0, and PTC Creo 2.0. One of our users, Damián Castillo, a former Pro/ENGINEER Wildfire user, said recently, “Between Pro/ENGINEER Wildfire 3.0 and 5.0, there were some enhancements. […]

Posted in What's in Creo 2.0 | Also tagged , , | Leave a comment

PTC Creo 2.0: What Pro/ENGINEER Wildfire 4.0 Users Should Know (part 2 of 3)

Creo Parametric Part Modeling 1

If you’re a Pro/ENGINEER Wildfire 4.0 user reading this blog, you know things have changed a lot since you deployed your design software. And you might be curious about whether any of these changes are relevant to you. Will the new generation of software make a difference to you and your work in any noticeable […]

Posted in What's in Creo 2.0 | Also tagged , , | Leave a comment
  • Archives

  • Connect with PTC Creo