Tag Archives: Creo Parametric 2.0

Creo and AMD Give Users Greater Flexibility with Superior Graphics

By Ailbhe Coughlan | Published: Aug 7, 2012

With Creo 2.0 PTC wanted to offer you flawless graphics performance, so we went to the best sources on the market. Hundreds of hours of joint collaboration and development between AMD and PTC have resulted in a graphics card that enhances all the fine little points of your designs. In this video, Demir Ali discusses […]

Posted in Partner Products | Also tagged Adoption, AMD, AMD FirePro, design graphics | Leave a comment

Smackdown: Creo Parametric head-to-head with Pro/ENGINEER – Match 1

By Geoff Hedges | Published: Jun 4, 2012

As Michael Buffer says, “Let’s Get Ready to Rumble!” Time to rock and roll and compare out-of-the box versions of Pro/ENGINEER Wildfire 5.0 with Creo Parametric 2.0 and see how they stack up. We’ll compare on same hardware platform, same proficient user, and same challenge, where only the software is the variable. In all three […]

Posted in What's in Creo 2.0 | Also tagged Adoption, Assemblies, comparison, Creo, Freestyle, Pro/ENGINEER Wildfire 5.0, PTC, Sketcher | Leave a comment

Creo 2.0: New and Advanced 3D Cross Sections for Creo Parametric 2.0

By Geoff Hedges | Published: May 23, 2012

So far, we’ve covered a variety of zippy new enhancements for Creo Parametric 2.0 that up your design speed, intensify your graphics quality, and even simplify the migration of your current behemoth CAD program to our sleek and sturdy Creo 2.0 suite. This week we’ll focus in on Creo Parametric 2.0 and the newest additions […]

Posted in What's in Creo 2.0 | Also tagged 3D section, Adoption, Creo 2.0, Cross Sections, Paul Sagar | Leave a comment

OCUS Confirms Creo Parametric 2.0 Advantage over Pro/ENGINEER Wildfire 5.0

By Geoff Hedges | Published: May 22, 2012

If you want empirical data on how Creo Parametric 2.0 performs on your system, this is a good article for you. Using Olaf Corten’s Utilities (OCUS benchmark), you can capture and compare performance data for various platforms and software releases, including your own. Olaf recently updated the OCUS benchmark for Creo Parametric 2.0, 1.0, and […]

Posted in What's in Creo 2.0 | Also tagged Adoption, benchmark, creo 1.0, graphics, OCUS, Olaf Corten, Pro/E, Pro/ENGINEER Wildfire 5.0, Wildfire | Leave a comment

Creo 2.0: Core Enhancements to Sketching in Creo Parametric

By Geoff Hedges | Published: May 17, 2012

As a designer, you can probably pinpoint your top five go-to tools in CAD. Creating and changing sketch-based features is probably one of them. While sketching already was a handy tool in Pro/ENGINEER Wildfire 5.0, it just became handier with several core enhancements for Creo Parametric. For starters, we enveloped the sketching tool right into […]

Posted in What's in Creo 2.0 | Also tagged Adoption, Creo 2.0, John Buchowski, Pro/ENGINEER Wildfire sketching, PTC, Sketcher, sketching | Leave a comment

Creo Parametric 2.0: New Design Software Delivers Great Graphics Performance

By Geoff Hedges | Published: May 3, 2012

Good news. You can now get world-class graphics performance to go with your world-class PTC software. That’s because we’ve recently partnered with AMD and NVIDIA to deliver dramatic graphics performance acceleration for 3D CAD design and precise rendering – up to 10x the performance you’re getting with Creo Parametric 1.0, Pro/ENGINEER Wildfire 5.0, or earlier […]

Posted in Partner Products, What's in Creo 2.0 | Also tagged Adoption, AMD FirePro, Anti-Aliasing, Creo, graphics, LAM, NVIDIA Quadro, OIT, Order Independent Transparency, Real-time rendering | Leave a comment

PTC Express: Creo 2.0 Doubles Design Productivity, Delivers Conceptual Design Gains and Modular Assembly

By Admin | Published: May 2, 2012

Creo 1.0 provided nine integrated purpose-built tools that enabled a much broader design contribution across the enterprise. Creo 2.0 takes another leap forward by delivering user interface enhancements that double design productivity for Pro/ENGINEER users, apps that substantially improve the conceptual design process, and a new role-specific app supporting modular product assembly. Read more about […]

Posted in Creo reactions, What's in Creo 2.0 | Also tagged Adoption, Creo 2.0, PTC Express | Leave a comment

Pro/ENGINEER Users: One Move That Can Double Your Design Productivity

By Geoff Hedges | Published: Apr 27, 2012

Creo Parametric 2.0 is Here! If we narrowed the new release down to one word, we’d call it speedy. Speedy delivery. Speedy concept design. Speedy assemblies. Speedy apps. Over the next few months, this blog will highlight everything Creo Parametric 2.0 offers you– whether you’re a Product Manager, Designer, Engineer, Analyst, or Tooling Engineer. Create […]