The KTM 690 Duke Motorbike: Brand New Wheels

Olaf Seger, an engineer at KTM, just reinvented the wheel.

That is, he designed a new wheel for the 2013 KTM 690 Duke, a powerful single-cylinder motorcycle used in racing and road riding.

“The KTM 690 wheel introduces a new generation to the product line,” says Seger.  “Going forward, KTM will use these wheels on many of its new models.” The 2013 design is strong as ever. But visibly, you can see that the familiar 5-spoke design has been replaced with a less traditional configuration, a lighter one.

Previous KTM wheel design (left) and 2013 wheel design (right)
Previous KTM wheel design (left) and 2013 wheel design (right)

That’s no small accomplishment in the world of racing bikes. In fact, Seger says that redesigning the wheel was one of the greatest challenges on the 2013 model. Even microscopic changes to the design had enormous effects on the life of a wheel as well as its performance. One wrong dimension, even a small one, and the whole component can fail–dangerously.

KTM Wheel design in PTC Creo

KTM Wheel design in PTC Creo

On the other hand, with a smart tweak here and there, you get a lighter responsive wheel that helps maximize power to weight, lower potential vibration, improve stability and drive fuel efficiency up.

Prohibitive Prototypes

As you might expect, the new wheels required a lot of testing. So much testing that prototyping would have become prohibitively expensive and delayed development by months. Fortunately, Seger had PTC Creo Simulate.

“With PTC Creo Simulate, we save a lot of time because we can check within approximately an hour whether a design change was successful,” says Seger.

The design team can then repeat simulations easily, too. “If you set parameters accordingly, you don’t have to worry about ongoing design changes,” he says. “The program checks them automatically.”

Wheel Simulation with PTC Creo Simulate

Wheel Simulation with PTC Creo Simulate

With these frequent simulations, the team reduced expensive prototypes, experimented more, and ensured that they had created wheels that were both lightweight and would endure on the road for a very long time.

Detect Problems and Optimize Designs with PTC Creo

Detect Problems and Optimize Designs with PTC Creo

Changes Throughout

One of the biggest challenges to redesigning the wheels was synchronizing work with changes that were taking place in the rest of the bike. The seat, twin plug head, exhaust—nearly everything was reconsidered for this model. To help ensure that all those separate activities didn’t lead to conflicts, the KTM team used PTC Windchill data management.

“With PTC Windchill data management, we’re always up-to-date with the data and the work of the other engineers,” says Seger. The software helps engineers avoid mistakes, because “you usually realize pretty quickly what another engineer is currently working on, i.e., what his current design status is.”

Again, this saved KTM even more time during development.

“KTM would definitely not be able to put such good products on the market so quickly without PTC Creo, especially those products that draw heavily from the latest technological innovations.”

And Seger likes quick.

A lot.

“Well, it’s fantastic to ride the bike you’ve helped design yourself, where you know how it came about. Every time you ride it, you’re filled with pleasure.” 

This entry was posted in Creo Customers and tagged , , , , , , , , , . Bookmark the permalink. Trackbacks are closed, but you can post a comment.

Post a Comment

Your email is never published nor shared. Required fields are marked *

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

You may use these HTML tags and attributes: <a href="" title="" rel=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <pre> <q cite=""> <strike> <strong>